i also heard that the intake manifold gasket is known to leak on this yr and modle.. is it hard to do ?How do i change the fuel filter on a 00 altima?
get a manual or call dealershipHow do i change the fuel filter on a 00 altima?
its under the car by the fuel hose intake
Thursday, June 2, 2011
How do you change the fuel filter on a 1999 mazda truck w/ 3.0 litre engine?
Have gotten the fuel filter almost off. On the end closest to the engine, diengaged the quick connect fitting and the filter came out on that side, but the end closest to the tank has a metal coupling on it which i cannot figure out. How do you get it to release the filter?How do you change the fuel filter on a 1999 mazda truck w/ 3.0 litre engine?
that metal coupling is a safety strap i believe, that ford used for years. pull it out of the way and use the same extractor that you were on the other side, after that it should be a cake walk.
that metal coupling is a safety strap i believe, that ford used for years. pull it out of the way and use the same extractor that you were on the other side, after that it should be a cake walk.
How do you change the fuel filter on a 1994 saturn sl2?
like what steps do i need to take before i do this?How do you change the fuel filter on a 1994 saturn sl2?
just unscrew the gas cap to relief the pressure, disconnect negative battery terminal, unscrew the top n bottom with a wrench then reverse process.How do you change the fuel filter on a 1994 saturn sl2?
Buy the filter, start the engine, remove the fuel pump fuse and let the car idle until it stops, get under the car, put a catch pan under the filter, and use tools to remove it. Reverse process.How do you change the fuel filter on a 1994 saturn sl2?
you might need a special tool to remove it , pull out your fuel pump fuse and run your car until it stalls, this will relieve the pressure in the gas line then remove the filter and install. make sure the arrow on the filter goes the rite way. then plug back in the fuel pump fuse then turn key forward and wait till the pump stops then turn over engine
just unscrew the gas cap to relief the pressure, disconnect negative battery terminal, unscrew the top n bottom with a wrench then reverse process.How do you change the fuel filter on a 1994 saturn sl2?
Buy the filter, start the engine, remove the fuel pump fuse and let the car idle until it stops, get under the car, put a catch pan under the filter, and use tools to remove it. Reverse process.How do you change the fuel filter on a 1994 saturn sl2?
you might need a special tool to remove it , pull out your fuel pump fuse and run your car until it stalls, this will relieve the pressure in the gas line then remove the filter and install. make sure the arrow on the filter goes the rite way. then plug back in the fuel pump fuse then turn key forward and wait till the pump stops then turn over engine
Is it safe to change a fuel filter on a 2005 grand am without relieving the pressure first? How hard is it?
It has a 6cyl. and also where is it located?Is it safe to change a fuel filter on a 2005 grand am without relieving the pressure first? How hard is it?
Grab a Hayne's manual. It will tell you where the fuel filter is and it'll tell you how to relieve the pressure as well. It's a $15 book...pick it up when you get the fuel filter. Besides, every person should have one for their vehicle...it's like a Bible in most cases.
Typically, relieveing the pressure is just a matter of a fuse or a switch, so it's not worth the gasoline spill to save 30 seconds of time.Is it safe to change a fuel filter on a 2005 grand am without relieving the pressure first? How hard is it?
I don't have this vehicle, but almost all newer vehicles have special retaining clips or quick connect fittings for the fuel lines. Therefore, you will have to get a Hayes or Chilton manual to figure out which special tool you need to remove the filter (every company seams to have a different set-up). Also, notice I said quick connect fittings, not quick disconnect fittings. They have a nasty ability to rust on the inside and collect dirt, which makes them particularly difficult to remove. Use lots of P%26amp;P (Penetrating oil %26amp; Persistance). The occasional swear word also helps, I find!
As far as pressure goes, you should always relieve the pressure first, but you will not harm the system if you don't. Just be prepared for a stream of gas to come out and clean up the spill immediately. Gasoline will burn the skin quite badly if it stays in contact with your skin for long.
To find the fuel filter, just follow the fuel line from the tank to the injectors. The fuel filter will be a cylindrical object in-line with the fuel line. Also be sure to install the new filter in the same orientation. They are normally stamped with an arrow indicating the direcion of fuel travel.advice on meeting people chicken enchilada recipe
Grab a Hayne's manual. It will tell you where the fuel filter is and it'll tell you how to relieve the pressure as well. It's a $15 book...pick it up when you get the fuel filter. Besides, every person should have one for their vehicle...it's like a Bible in most cases.
Typically, relieveing the pressure is just a matter of a fuse or a switch, so it's not worth the gasoline spill to save 30 seconds of time.Is it safe to change a fuel filter on a 2005 grand am without relieving the pressure first? How hard is it?
I don't have this vehicle, but almost all newer vehicles have special retaining clips or quick connect fittings for the fuel lines. Therefore, you will have to get a Hayes or Chilton manual to figure out which special tool you need to remove the filter (every company seams to have a different set-up). Also, notice I said quick connect fittings, not quick disconnect fittings. They have a nasty ability to rust on the inside and collect dirt, which makes them particularly difficult to remove. Use lots of P%26amp;P (Penetrating oil %26amp; Persistance). The occasional swear word also helps, I find!
As far as pressure goes, you should always relieve the pressure first, but you will not harm the system if you don't. Just be prepared for a stream of gas to come out and clean up the spill immediately. Gasoline will burn the skin quite badly if it stays in contact with your skin for long.
To find the fuel filter, just follow the fuel line from the tank to the injectors. The fuel filter will be a cylindrical object in-line with the fuel line. Also be sure to install the new filter in the same orientation. They are normally stamped with an arrow indicating the direcion of fuel travel.
Can anyone tell me how to change the fuel filter on a 94 volvo 850 2.3 turbo wagon?
Like where the filter is located I thought it was on the rear side of the strut tower mounted on the fraim rail in the fuel line but I don't see it.
It's a '94 volvo wagon
850 l. engine
2.3 turbo
ThanksCan anyone tell me how to change the fuel filter on a 94 volvo 850 2.3 turbo wagon?
The fuel filter is on the under the passenger side of the car, in front of the rear wheel.
It is bolted to the under body of the car with a large clamp.
There are two hoses that attach to it.
One 12mm bolt that holds the clamp.
To take each hose off the car, you will need a large screw driver to slide the slip collar back which will release the tension so the hose will slide off of the filter (very easy to do). But don't pry at the hose, pry at the slip collar.
To install, point the arrow of the filter to the front of the car and slide on the hoses.( with the hoses all the way on, tug on them to make sure they are on all the way).
Good luck and be care full, gas is flammable.
It's a '94 volvo wagon
850 l. engine
2.3 turbo
ThanksCan anyone tell me how to change the fuel filter on a 94 volvo 850 2.3 turbo wagon?
The fuel filter is on the under the passenger side of the car, in front of the rear wheel.
It is bolted to the under body of the car with a large clamp.
There are two hoses that attach to it.
One 12mm bolt that holds the clamp.
To take each hose off the car, you will need a large screw driver to slide the slip collar back which will release the tension so the hose will slide off of the filter (very easy to do). But don't pry at the hose, pry at the slip collar.
To install, point the arrow of the filter to the front of the car and slide on the hoses.( with the hoses all the way on, tug on them to make sure they are on all the way).
Good luck and be care full, gas is flammable.
How do i change the fuel filter on a diesel citroen zx please ?
citroen zx 1.9 diesel how to change the filter please thanks How do i change the fuel filter on a diesel citroen zx please ?
Several types eg roto,cav or bosch If its the screw on type just remove old filter get new filter and fill it to the top with fresh diesel screw it back on and fire up the engine no need to bleed this type.If its paper element undo the filter housing remove old filter clean out filter housing fit new filter undo small 8mm bleed screw and either squeeze priming bulb or press lift pump primer button till fuel with no air bubbles comes out of bleeder lock up bleed screw and fire engine.Always make sure rubber O rings are fully seated or next time you start the car you will have to bleed it again as fuel will run back in to the tank and system will pull in air.
Several types eg roto,cav or bosch If its the screw on type just remove old filter get new filter and fill it to the top with fresh diesel screw it back on and fire up the engine no need to bleed this type.If its paper element undo the filter housing remove old filter clean out filter housing fit new filter undo small 8mm bleed screw and either squeeze priming bulb or press lift pump primer button till fuel with no air bubbles comes out of bleeder lock up bleed screw and fire engine.Always make sure rubber O rings are fully seated or next time you start the car you will have to bleed it again as fuel will run back in to the tank and system will pull in air.
Do I need to change the fuel filter and manual transaxle fluid in my 2006 Mazda3i?
There's nothing about these things in the maintenance schedule of the owner's manual. If they need to be replaced, after how many miles?Do I need to change the fuel filter and manual transaxle fluid in my 2006 Mazda3i?
fuel filter is always a good ideal...how many miles ? Newer style trans like yours are designed to go 100,000 miles before servicing...but with poor quality fuel these days a fuel filter is good to change...and check or replace air filter ..plugs are also called %26quot;extended-life%26quot; plugs..so should be fine...I would also add a good fuel injector cleaner about every third tank of fuel...my favorite is available most everywhere but is made by chevrn...in a black bottle...called %26quot;Chevron-Techroline%26quot;...this is the most effective additive I have found yetDo I need to change the fuel filter and manual transaxle fluid in my 2006 Mazda3i?
I don't think you have to worry about your manual transmission. I would contact a mazda dealer and ask them to be sure.
fuel filter is always a good ideal...how many miles ? Newer style trans like yours are designed to go 100,000 miles before servicing...but with poor quality fuel these days a fuel filter is good to change...and check or replace air filter ..plugs are also called %26quot;extended-life%26quot; plugs..so should be fine...I would also add a good fuel injector cleaner about every third tank of fuel...my favorite is available most everywhere but is made by chevrn...in a black bottle...called %26quot;Chevron-Techroline%26quot;...this is the most effective additive I have found yetDo I need to change the fuel filter and manual transaxle fluid in my 2006 Mazda3i?
I don't think you have to worry about your manual transmission. I would contact a mazda dealer and ask them to be sure.
Subscribe to:
Posts
(Atom)